3. Lift forward end of crop divider and install bolt (B) and
special stepped washer (A) (step towards divider).
Tighten bolt.
4. Check that divider does not move laterally. Adjust
bolts (A) as required to tighten divider and remove
lateral play when pulling at divider tip.
5. Close endshield. Refer to
page
87.
214325
ASSEMBLING HEADER AND ADAPTER
3.4.9 Closing Endshield,
Figure 3.167: Crop Divider Installation
Figure 3.168: Crop Divider Adjustment
85
Revision A