Adjusting Auto Reel Speed (Claas 700 Series) - MacDon FFT FD75 Assembly Instructions Manual

Adjusting Auto Reel Speed (CLAAS 700 Series)

Adjust auto reel speed as follows:
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to
combine operator's manual for updates.
1. Turn control knob (A) to highlight HEADER/REEL
icon (B), and press control knob (A) to select it. The
HEADER/REEL dialog menu opens.
2. Turn control knob (A) to select REEL SPEED (B), and
adjust reel speed (if you are NOT using Auto Reel
Speed). A graph displays in dialog menu.
214325
SETTING UP AUTO HEADER HEIGHT CONTROL
Figure 5.235: CLAAS Combine Display,
Console, and Joystick
Figure 5.236: CLAAS Combine Display,
Console, and Joystick
248
Revision A