6. Place wing lock spring handles (A) in lock
(upper) position.
7. Check that both header float lock levers (A) are in
down (UNLOCK) position.
8. Place stabilizer wheels and slow speed transport
wheels (if equipped) in storage position as follows:
a. Support wheel weight by lifting slightly with one
hand, and pull up on handle (A) to release the lock.
b. Lift wheels to desired height, and engage support
channel into slot (B) in upper support.
c. Push down on handle (A) to lock.
214325
PERFORMING PREDELIVERY CHECKS
106
Figure 4.30: Wing Lock in Lock Position
Figure 4.31: Header Float Lock in
Unlock Position
Figure 4.32: Left Wheel
Revision A