18. Attach driveline (A) to combine output shaft.
19. Disengage each adapter float lock by moving latch (A)
away from adapter and moving both header float lock
levers (B) down (UNLOCK).
20. Proceed to
3.4 Completing Header Assembly, page
3.3.5 New Holland Combines
Attaching Header to New Holland CR/CX Combine
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
214325
ASSEMBLING HEADER AND ADAPTER
79.
73
Figure 3.136: Driveline and Output Shaft
Figure 3.137: Float Lock in UNLOCK Position
Revision A