14. Rotate disc (A) on adapter driveline storage hook, and
remove driveline from hook.
15. Pull back collar (A) on end of driveline, and push
driveline onto combine output shaft (B) until collar locks.
16. Proceed to
3.4 Completing Header Assembly, page
3.3.2 Case IH Combines
Attaching Header to Case IH Combine
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
214325
ASSEMBLING HEADER AND ADAPTER
79.
34
Figure 3.41: Driveline
Figure 3.42: Driveline
Revision A