Table of Contents
Advertisement
13. Clean mating surface of coupler (A) and position onto
CA25 receptacle (B).
14. Turn knob (C) to secure coupler to receptacle.
15. Connect combine harness (D) to reel fore-aft/header tilt
selector receptacle (E).
16. Remove shipping wire from driveline (A) and float
lock lever (B).
17. Rotate disc (A) on adapter driveline storage hook, and
remove driveline from hook.
214325
ASSEMBLING HEADER AND ADAPTER
72
Figure 3.133: Coupler
Figure 3.134: Adapter Shipping Configuration
Figure 3.135: Driveline
Revision A
Hide quick links:
Advertisement
Table of Contents
