Table of Contents
Advertisement
29. Route excess MacDon harness length back into the
terminal compartment.
30. Secure MacDon harness (A) to existing CLAAS
harness (B) with cable ties.
Attaching Header to CLAAS Combine
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
1. Move handle (A) on CA25 Combine Adapter into raised
position, and ensure pins (B) at bottom corners of
adapter are retracted.
214325
ASSEMBLING HEADER AND ADAPTER
69
Figure 3.125: Existing Harness and
MacDon Harness
Figure 3.126: Pins Retracted
Revision A
Hide quick links:
Advertisement
Table of Contents
