Table of Contents
Advertisement
26. Route switch harness (A) under the cab floor alongside
the existing harnesses. Do NOT secure harness with
cable ties until routing is complete.
27. Route switch harness (A) between cab floor and frame,
from bottom left corner of cab to conduit (B), and along
conduit (B) to multicoupler.
28. Secure wiring harness (A) to conduit (B) (starting from
the multicoupler end) with cable ties (C) at
locations shown.
214325
ASSEMBLING HEADER AND ADAPTER
68
Figure 3.122: Cab Underside of
CLAAS 500 Series
Figure 3.123: CLAAS 500 Series Shown
Figure 3.124: Combine Multicoupler
Revision A
Hide quick links:
Advertisement
Table of Contents
