Setting Up Reel Settings (Gleaner S9 Series) - MacDon FFT FD75 Assembly Instructions Manual

7. Touch REEL DIAMETER field (A) and a numeric
keypad displays. Enter 40 as MacDon Reel Diameter.
8. Touch REEL PPR (Speed Pulses Per Revolution)
field (B) and enter 30 as PPR value for your MacDon
header. (PPR is number of teeth on reel speed
sprocket. AGCO configured MacDon headers have 30
teeth on sensor pickup reel).
9. Touch green check mark (B) at bottom of numeric
keypad (A) when complete, or red X to cancel.
10. When entries are complete, touch green check mark (A)
at bottom of HEADER SETTINGS page.

Setting up Reel Settings (Gleaner S9 Series)

CAUTION
Clear the area of other persons, pets, etc. Keep children away from machinery. Walk around the machine
to be sure no one is under, on, or close to it.
214325
SETTING UP AUTO HEADER HEIGHT CONTROL
183
Figure 5.90: Header Settings
Figure 5.91: Numeric Keypad
Figure 5.92: Header Settings Page
Revision A