Table of Contents
Advertisement
20. Secure the MacDon wiring harness (A) to conduit (B)
(starting from the multicoupler end) with cable ties (C).
Installing Reel Fore-Aft/Header Tilt Selector Switch and Harness: CLAAS 700 Series
IMPORTANT:
To prevent possible damage to electronic components, disconnect the positive cable from the combine battery and
turn BATTERY DISCONNECT switch OFF before connecting harness to combine connectors.
1. Prepare to install the REEL FORE-AFT/HEADER TILT
switch:
a. Fully lower combine feeder house.
b. Shut down the combine. Disconnect the
battery cable.
c. Obtain the long reel fore-aft/header tilt switch wire
harness (MD #279753) from the completion
package kit.
214325
ASSEMBLING HEADER AND ADAPTER
61
Figure 3.104: Combine Multicoupler
Figure 3.105: MD #279753 Wiring Harness
A - Cab End
B - Multicoupler End
C - Power Supply Connectors
D - Switch Connectors
Revision A
Hide quick links:
Advertisement
Table of Contents
