Table of Contents
Advertisement
5. Use lock handle (B) to engage lugs (A) with adapter.
CAUTION
Never start or move the machine until you are sure all bystanders have cleared the area.
6. Start engine and lower header.
7. Stop engine and remove key from ignition.
NOTE:
The CA25 Combine Adapter is equipped with a multicoupler that connects to the combine. If combine is
equipped with individual connectors, a multicoupler kit (single-point connector) must be installed. Refer to Table
3.3, page 32
for a list of kits and installation instructions that are available through your combine Dealer.
Table 3.3 Multicoupler Kits
Challenger
Gleaner R/S Series
Massey Ferguson
8. Raise handle (A) to release multicoupler (B) from
adapter.
214325
ASSEMBLING HEADER AND ADAPTER
Combine
Figure 3.36: AGCO Group Feeder House
Figure 3.37: Adapter Multicoupler
32
Kit Number
71530662
71414706
71411594
Revision A
Hide quick links:
Advertisement
Table of Contents
