6 Running up Header
To run up header, follow these steps:
DANGER
Engage header safety props and reel props before working under header or reel.
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, always stop engine
and remove key before leaving the operator's seat, and always engage safety props before going under
the machine for any reason.
CAUTION
Never start or move the machine until you are sure all bystanders have cleared the area.
1. Start combine, raise header fully, and engage header lift cylinder lock-out valves.
2. Stop engine and remove key.
3. Lower plastic pan under adapter and check for shipping
materials/debris that may have fallen under adapter
draper.
4. Rotate latches (A) to unlock handles (B).
5. Hold pan (C) and rotate handles (B) to release pan.
Lower pan to expose draper.
214325
Figure 6.1: Adapter Plastic Pan
273
Revision A