MacDon FFT FD75 Assembly Instructions Manual page 26

4. Lift reel, and remove pins from endsheet and reel arm.
5. Align reel lift cylinder mounting holes with lug on
endsheet and hole in reel arm.
6. Secure cylinder to endsheet and reel arm with clevis
pins (A) and (B) as shown.
•
Insert cotter pin into clevis pin (A) on OUTBOARD
side of reel arm
•
Insert cotter pin into clevis pin (B) on INBOARD side
of endsheet
7. Remove two top bolts (A) on center reel arm to allow
center reel arm to move.
214325
ASSEMBLING HEADER AND ADAPTER
16
Figure 3.3: Reel Right Arm
Figure 3.4: Reel Center Arm
Revision A