Table of Contents
Advertisement
11. Open receptacle cover (A) on adapter.
12. Press lock button (B) and pull handle (C) to fully
open position.
13. Clean receptacle mating surfaces.
14. Remove hydraulic quick coupler (A) from combine and
clean mating surfaces.
15. Position coupler onto adapter receptacle (A) and push
handle (B) (not shown) to engage multicoupler pins into
receptacle.
16. Push handle (B) to closed position until lock button (C)
snaps out.
214325
ASSEMBLING HEADER AND ADAPTER
37
Figure 3.49: Adapter Receptacle
Figure 3.50: Combine Connectors
Figure 3.51: Hydraulic Connection
Revision A
Hide quick links:
Advertisement
Table of Contents
