5. Ensure three icons (A) depicted in illustration at right
appear on combine display.
6. Use scroll knob (A) to highlight middle icon (the green i)
and press check mark button (B) to select it. This will
display Message Center.
7. Use scroll knob to highlight DIAGNOSTIC
ADDRESSES (A) from right column, and then select it
by pressing check mark button.
8. Use scroll knob to highlight drop down box (B), and
press check mark button to select it.
214325
SETTING UP AUTO HEADER HEIGHT CONTROL
Figure 5.153: John Deere Combine Display
Figure 5.154: John Deere Combine Control
Console
Figure 5.155: John Deere Combine Display
212
Revision A