17. Return the console to its original position, and install the
washer and 13 mm hex nut (A) removed in
Step
3, page
53.
18. Route MacDon wiring harness (A) underneath the cab
floor. Place the harness in the steel tray (B) along
underside of cab floor to prevent it from being
damaged.
19. Route wiring harness from the left corner of steel tray to
conduit (A), between cab floor and frame as shown at
location (B), and along conduit (A) down to the combine
multicoupler.
214325
ASSEMBLING HEADER AND ADAPTER
60
Figure 3.101: Combine Monitor
Figure 3.102: Cab Underside
Figure 3.103: Cab Underside
Revision A