MacDon FFT FD75 Assembly Instructions Manual page 4

List of Revisions
The following list provides an account of major changes from the previous version of this document.
Summary of Change
The name Lexion changed to CLAAS—representing a
wider product range.
Filler cap now includes flange head screws for better fit.
Added topic for removing filler plates from transition
frame when attaching to AGCO Class 7 or 8 combines.
Harness MD #220337 superseded by MD #279753.
Deleted step as per product support feedback.
Modified instruction and image; header must be in full
smile mode.
Moved procedure to keep reel topics together.
Added reel cam checking topic.
Added topic for adjusting header level.
Removed Wing Balance chart.
Added topic for checking and adjusting the draper
tension.
Added header controls topic for Case 8010 combines.
•
Added checking feed draper tension.
•
Added note to install options before checking float.
•
Moved Check header float ahead of Check wing
balance.
•
Added remove all shipping wires.
214325
Location
Throughout
3.2.1 Installing Filler Cap, page 21
Preparing Transition Frame: AGCO Combines, page 29
•
Installing Reel Fore-Aft/Header Tilt Selector Switch
and Harness: CLAAS 500 Series, page 52
•
Installing Reel Fore-Aft/Header Tilt Selector Switch
and Harness: CLAAS 700 Series, page 61
4.7.1 Checking Pointed Guard Hold-Downs, page 95
4.8 Centering Reel, page 97
4.9 Measuring and Adjusting Reel Clearance to
Cutterbar, page 98
4.9.3 Checking and Adjusting Reel Cam, page 101
4.10 Checking and Adjusting Header Levelness, page
4.12.2 Adjusting Wing Balance, page 115
4.14 Checking and Adjusting Feed Draper Tension,
Setting Header Controls (Case 8010), page 150
8 Predelivery Checklist, page 295
ii
103
page 121
Revision A