Table of Contents
Advertisement
6. Secure the switch harness (A) at the rear of the feeder
house with cable tie.
7. Route harness (A) under cab and across to the
right side.
8. Route the switch harness (A) through the existing
grommet (B) on the electrical plate located at the rear of
the right side window.
9. Retrieve switch (A) and support (C) provided with kit.
10. Install switch (A) into support (C) from the top. Ensure
lugs on underside of support have secured the switch.
NOTE:
Image at right shows switch harness (B) connected to
switch (A).
214325
ASSEMBLING HEADER AND ADAPTER
47
Figure 3.72: Switch Harness Routing
Figure 3.73: Switch Harness Routing
Figure 3.74: Switch and Harness
Revision A
Hide quick links:
Advertisement
Table of Contents
