Lubricating Header; Greasing Procedure - MacDon FFT FD75 Assembly Instructions Manual

4.18 Lubricating Header

Table 4.5 Recommended Lubricant
Specification
SAE multipurpose

4.18.1 Greasing Procedure

Greasing points are marked on machine by decals showing a grease gun and grease interval in hours of operation.
Master grease point location decals are provided on header and adapter back frame.
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
214325
PERFORMING PREDELIVERY CHECKS
High temperature, extreme pressure (EP2) performance
with 1% max molybdenum disulphide (NLGI Grade 2)
lithium base
High temperature, extreme pressure (EP) performance with
10% max molybdenum disulphide (NLGI Grade 2)
lithium base
Description
Figure 4.77: FD75 Master Grease Point Decal
128
Use
As required unless
otherwise specified
Driveline slip-joints
Revision A