3. Push AUTO HEADER HEIGHT button (A). The LED
light (B) should flash continuously indicating that it is in
standby mode and waiting for a response from
Operator.
4. Briefly press HEADER DOWN button (A). The header
should lower automatically and LED light should stay
illuminated indicating that auto height system is
engaged and working.
5. Turn HEIGHT dial (A) to increase or decrease ground
pressure.
6. Turn SENSITIVITY dial (B) to control how quickly
AHHC reacts to varying ground conditions.
214325
SETTING UP AUTO HEADER HEIGHT CONTROL
169
Figure 5.67: Combine Header Control System
Figure 5.68: Header Down Button
Figure 5.69: Combine Header Control System
Revision A