Removing Shipping Stands - MacDon FFT FD75 Assembly Instructions Manual

2.3 Removing Shipping Stands

NOTE:
Unless otherwise specified, discard stands, shipping material, and hardware. The removable stands are
painted yellow.
1. Remove two bolts (A) securing right fork slider channel
to brace (C).
NOTE:
To access bolts at lower fork slider brace, header must
be supported on 150 mm (6 in.) blocks. Refer to Step
page 9.
2. Remove two bolts (B) securing right fork slider channel
to lower brace (D).
3. Repeat steps above for left side.
4. Remove bottom brace (A).
214325
UNLOADING HEADER AND ADAPTER
4,
10
Figure 2.8: Fork Slider Channels
Figure 2.9: Lower Brace Removal
Revision A