Table of Contents
Advertisement
19. Install MacDon wiring harness between cigarette lighter
and lighter harness as follows:
a. Remove insulation from red (A) and black (B) male
connectors.
b. Remove CLAAS harness from cigarette lighter.
c. Attach red wire female connector (C) on MacDon
harness to power terminal on cigarette lighter.
d. Attach black wire female connector (D) on MacDon
harness to negative terminal on cigarette lighter.
e. Attach red wire male connector (A) and black wire
male connector (B) to same colored wires in the
CLAAS harness connector (E) (red to red; black
to black).
20. Secure MacDon harness as required with cable ties.
21. Reinstall access panel (A).
22. Proceed to Step
24, page 67
multicoupler.
214325
ASSEMBLING HEADER AND ADAPTER
to connect to the combine
66
Figure 3.117: Wiring Harnesses
Figure 3.118: Plastic Cover
Revision A
Hide quick links:
Advertisement
Table of Contents
