Setting Up Combine Adapter; Installing Filler Cap - MacDon FFT FD75 Assembly Instructions Manual

3.2 Setting up Combine Adapter

Complete the following procedures in order in which they are listed:
•
3.2.1 Installing Filler Cap, page 21
•
3.2.2 Removing Auger Flighting Extensions, page 23
•
3.2.3 Removing Stripper Bars, page 23
•
3.2.4 Replacing Feeder Deflectors: New Holland CR Combines, page 24

3.2.1 Installing Filler Cap

1. Remove filler cap and bag with six flange head screws
from bag (A).
CAUTION
Fluid may be under pressure. Allow pressure to equalize
by loosening screws and lifting shipping cover slightly.
2. Remove yellow shipping cover (A) from adapter frame.
Discard cover and screws.
214325
ASSEMBLING HEADER AND ADAPTER
21
Figure 3.13: Hardware Bag
Figure 3.14: Yellow Shipping Cover
Revision A