Table of Contents
Advertisement
3. To calibrate AUTO CONTOUR, use control knob (A) to
scroll left and right in top row until AUTO CONTOUR
icon (B) is highlighted. Press control knob (A) to
select it.
4. Use control knob (A) to highlight icon that resembles a
header with up and down arrows (not shown), and
press control knob (A) to select it. The highlighted
HEADER icon (B) will be displayed on the screen.
5. With letter A (A) highlighted, use control knob (B) to
move to highlight icon that resembles a header with up
and down arrows (C), and press control knob (B) to
select it.
214325
SETTING UP AUTO HEADER HEIGHT CONTROL
Figure 5.224: CLAAS Combine Display,
Console, and Joystick
Figure 5.225: CLAAS Combine Display,
Console, and Joystick
Figure 5.226: CLAAS Combine Display,
Console, and Joystick
244
Revision A
Hide quick links:
Advertisement
Table of Contents
