Table of Contents
Advertisement
2. Open endshield. Refer to
page
83.
3. Loosen nut (A) on pin (B) from inside endsheet.
4. Close endshield and adjust position to achieve desired
gap between front end of shield and header frame in
accordance with Table
5. Open endshield and tighten nut (A).
6. Check for a snug fit between top of shield and header
frame, and for full engagement of endshield on pin (B).
7. If necessary, loosen bolts on catch (C) and adjust catch
as required to reposition shield.
8. Tighten bolts on catch (C).
9. Close endshield. Refer to
page
87.
214325
PERFORMING PREDELIVERY CHECKS
3.4.5 Opening Endshield,
4.6, page
135.
3.4.9 Closing Endshield,
Figure 4.85: Endshield Adjustment
136
Revision A
Hide quick links:
Advertisement
Table of Contents
