NOTE:
Changes may have been made to combine controls or display since this document was published. Refer to
combine operator's manual for updates.
1. Use < key (C) or > key (D) to select SENSITIVITY CAC,
and press OK key (E).
2. Use – key (A) or + (B) key to change reaction speed
setting, and press OK key (E).
3. Use line (A) or value (B) to determine sensitivity setting.
214325
SETTING UP AUTO HEADER HEIGHT CONTROL
Figure 5.209: CLAAS Combine Controls
Figure 5.210: CLAAS Combine Display
236
Revision A