Table of Contents
Advertisement
8. Remove four bolts (A), and remove braces (B) from
bottom of adapter.
9. Remove two bolts from bottom multicoupler guard
bracket (A).
10. Remove four bolts securing clamps at top bracket (B).
11. Remove multicoupler guard (C).
12. Remove four bolts (A) and two bolts (B) from shipping
stands at both outboard header legs. Remove stands.
214325
UNLOADING HEADER AND ADAPTER
12
Figure 2.12: View from below Header
Figure 2.13: Multicoupler Guard
Figure 2.14: Shipping Stands at Outboard
Header Legs (Right Side Shown)
Revision A
Hide quick links:
Advertisement
Table of Contents
