Table of Contents
Advertisement
11. Open receptacle cover (A) on CA25.
12. Push in lock button (B) and pull handle (C) to full open
position.
13. Clean receptacle mating surfaces.
14. Remove hydraulic quick coupler (A) from storage plate
on combine, and clean mating surface of coupler.
15. Position coupler (A) onto CA25 receptacle, and push
handle (B) to engage pins into receptacle.
16. Push handle (B) to closed position until lock button (C)
snaps out.
17. Remove cover on CA25 electrical receptacle.
18. Remove connector (D) from combine.
19. Align lugs on connector (D) with slots in CA25
receptacle, and push connector onto receptacle. Turn
collar on connector to lock it in place.
214325
ASSEMBLING HEADER AND ADAPTER
76
Figure 3.144: Adapter Receptacle
Figure 3.145: Combine Coupler
Figure 3.146: Connections
Revision A
Hide quick links:
Advertisement
Table of Contents
