Sftp Ipv6 - HP HSR6600 Command Reference Manual

Parameters
interface interface-type interface-number: Specifies a source interface by its type and number.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
To make sure the SFTP client and the SFTP server can communicate with each other, and to improve the
manageability of SFTP clients in the authentication service, HP recommends you to specify a loopback
interface as the source interface.
Examples
# Specify the source IP address of the SFTP client as 192.168.0.1.
<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1
Related commands
display sftp client source

sftp ipv6

Use sftp ipv6 to establish a connection to an IPv6 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress { zlib | zlib-openssh } | prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
sftp ipv6 server [ port-number ] [ identity-key rsa | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 }
| prefer-stoc-hmac { sha1 | sha1-96 } ] *
Views
User view
Default command level
3: Manage level
Parameters
server: Specifies an IPv6 server by its address or host name, a case-insensitive string of 1 to 46
characters.
port-number: Specifies the port number of the server, in the range of 0 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the server belongs to, where the
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the server is on the public
network, do not specify this option.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. In non-FIPS mode, the
algorithm is either dsa or rsa. In FIPS mode, the algorithm is rsa.
dsa: Specifies the public key algorithm dsa.
•
378