Connection Limit Configuration Commands; Connection-Limit Apply Policy; Connection-Limit Policy - HP HSR6600 Command Reference Manual

Connection limit configuration commands

connection-limit apply policy

Use connection-limit apply policy to apply a connection limit policy to the NAT module.
Use undo connection-limit apply policy to remove the application.
Syntax
connection-limit apply policy policy-number
undo connection-limit apply policy policy-number
Views
System view
Default command level
2: System level
Parameters
policy-number: Number of an existing connection limit policy. The value is 0.
Usage guidelines
After a connection limit policy is applied, you cannot add, remove, or modify the connection limit rules
in the connection limit policy view.
Examples
# Apply connection limit policy 0.
<Sysname> system-view
[Sysname] connection-limit apply policy 0
Related commands

connection-limit policy

connection-limit policy
Use connection-limit policy to create a connection limit policy and enter connection limit policy view.
Use undo connection-limit policy to delete the specified or all connection limit policies. By default, no
connection limit policy is created.
Syntax
connection-limit policy policy-number
undo connection-limit policy policy-number
Views
System view
437