Connection-Name; Cryptoengine Enable - HP HSR6600 Command Reference Manual

connection-name

Use connection-name to configure an IPsec connection name. This name functions only as a description
of the IPsec policy.
Use undo connection-name to restore the default.
Syntax
connection-name name
undo connection-name
Default
No IPsec connection name is configured.
Views
IPsec policy view, IPsec policy template view
Default command level
2: System level
Parameters
name: IPsec connection name, a case-insensitive string of 1 to 32 characters.
Example
# Set IPsec connection name to CenterToA.
<Sysname> system-view
[Sysname] ipsec policy policy1 1 isakmp
[Sysname-ipsec-policy-isakmp-policy1-1] connection-name CenterToA

cryptoengine enable

Use cryptoengine enable to enable the encryption engine.
Use undo cryptoengine enable to disable the encryption engine.
Syntax
cryptoengine enable [ slot slot-number ]
undo cryptoengine enable [ slot slot-number ]
Default
The encryption engine is enabled.
Views
System view
Default command level
2: System level
273