Display Tcp-Proxy Protected-Ip - HP HSR6600 Command Reference Manual

Field
UDP session establishment rate
ICMP sessions
ICMP session establishment rate
RAWIP sessions
RAWIP session establishment rate

display tcp-proxy protected-ip

Use display tcp-proxy protected-ip to display information about IP addresses protected by the TCP proxy
function.
Syntax
display tcp-proxy protected-ip [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
slot slot-number: Displays information about protected IP addresses on a card. slot-number specifies the
number of the slot that holds the card.
The following matrix shows the option and router compatibility:
Option
slot slot-number
Usage guidelines
For an HSR6602/6604/6608/6616 router, if you do not specify any parameter, this command displays
information about the protected IP addresses on all cards.
Examples
# Display information about all IP addresses protected by the TCP proxy function.
<Sysname> display tcp-proxy protected-ip
Protected IP
1.1.1.1
Table 80 Command output
Field
Protected IP
Port Number
6602
No
Port Number Type
any Dynamic
Description
IP address under the protection of TCP proxy.
Destination port number of the TCP connection request.
If the value of this field is any, the TCP proxy processes all TCP
connection requests destined for the IP address.
Description
UDP connection establishment rate.
Number of ICMP connections.
ICMP connection establishment rate.
Number of RAWIP connections.
RAWIP connection establishment rate.
HSR6602 6604/6608/6616
Yes Yes
Lifetime(min) Rejected packets
1 2
484