Sftp - HP HSR6600 Command Reference Manual

prefer-ctos-hmac: Specifies the preferred client-to-server HMAC algorithm. The default is sha1-96.
• md5: Specifies the HMAC algorithm hmac-md5. This keyword is not available in FIPS mode.
md5-96: Specifies the HMAC algorithm hmac-md5-96. This keyword is not available in FIPS mode.
•
sha1: Specifies the HMAC algorithm hmac-sha1.
•
• sha1-96: Specifies the HMAC algorithm hmac-sha1-96.
prefer-kex: Specifies the preferred key exchange algorithm. The default is dh-group-exchange in
non-FIPS mode, and is dh-group14 in FIPS mode.
• dh-group-exchange: Specifies the key exchange algorithm diffie-hellman-group-exchange-sha1.
This keyword is not available in FIPS mode.
dh-group1: Specifies the key exchange algorithm diffie-hellman-group1-sha1. This keyword is not
•
available in FIPS mode.
dh-group14: Specifies the key exchange algorithm diffie-hellman-group14-sha1.
•
prefer-stoc-cipher: Specifies the preferred server-to-client encryption algorithm. The default is aes128.
prefer-stoc-hmac: Specifies the preferred server-to-client HMAC algorithm. The default is sha1-96.
Usage guidelines
When the client's authentication method is publickey, the client must get the local private key for digital
signature. In non-FIPS mode, because the publickey authentication uses either RSA or DSA algorithm, you
must specify an algorithm (by using the identity-key keyword) in order to get the correct data for the local
private key.
In non-FIPS mode, the default algorithms are as follows:
The algorithm for publickey authentication is dsa.
•
The preferred client-to-server encryption algorithm is aes128.
•
The preferred client-to-server HMAC algorithm is sha1-96.
•
The preferred key exchange algorithm is dh-group-exchange.
•
• The preferred server-to-client encryption algorithm is aes128.
The preferred server-to-client HMAC algorithm is sha1-96.
•
In FIPS mode, the default algorithms are as follows:
The algorithm for publickey authentication is rsa.
•
The preferred client-to-server encryption algorithm is aes128.
•
• The preferred client-to-server HMAC algorithm is sha1-96.
The preferred key exchange algorithm is dh-group14.
•
The preferred server-to-client encryption algorithm is aes128.
•
The preferred server-to-client HMAC algorithm is sha1-96.
•
Examples
# Connect to the SCP server (192.168.0.1), download the file remote.bin from the server, and save it
locally to the file local.bin
<Sysname> scp 192.168.0.1 get remote.bin local.bin

sftp

Use sftp to establish a connection to an IPv4 SFTP server and enter SFTP client view.
374