Password-Control Aging - HP HSR6600 Command Reference Manual

Views
System view
Default command level
2: System level
Parameters
aging: Enables the password aging function.
composition: Enables the password composition restriction function.
history: Enables the password history function.
length: Enables the minimum password length restriction function.
Usage guidelines
For these four functions to take effect, the password control feature must be enabled globally.
You must enable a function for its relevant configurations to take effect. For example, if the minimum
password length restriction function is not enabled, the setting by the password-control length command
does not take effect.
The system stops recording history passwords after you execute the undo password-control history
enable command, but it does not delete the prior records.
Examples
# Enable the password control feature globally.
<Sysname> system-view
[Sysname] password-control enable
# Enable the password composition restriction function.
[Sysname] password-control composition enable
# Enable the password aging function.
[Sysname] password-control aging enable
# Enable the minimum password length restriction function.
[Sysname] password-control length enable
# Enable the password history function.
[Sysname] password-control history enable
Related commands
password-control enable
•
display password-control
•

password-control aging

Use password-control aging to set the password aging time.
Use undo password-control aging to restore the default.
Syntax
password-control aging aging-time
undo password-control aging
217