Portal Redirect-Url; Portal Server - HP HSR6600 Command Reference Manual

wireless: Specifies the access port type as IEEE 802.1 1 standard wireless interface, which corresponds to
code 19. This keyword is usually specified on an interface for wireless portal users, making sure that the
NAS-Port-Type value delivered by the access device to the RADIUS server is wireless.
Examples
# Specify the NAS-Port-Type value of GigabitEthernet 3/0/1 as IEEE 802.1 1 standard wireless interface.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] portal nas-port-type wireless

portal redirect-url

Use portal redirect-url to specify the autoredirection URL for authenticated portal users.
Use undo portal redirect-url to restore the default.
Syntax
portal redirect-url url-string
undo portal redirect-url
Default
An authenticated portal user is redirected to the URL that the user entered in the address bar before portal
authentication.
Views
System view
Default command level
2: System level
Parameters
url-string: Autoredirection URL for authenticated portal users, a string of 1 to 127 characters. It must start
with http:// or https:// and must be a fully qualified URL.
Usage guidelines
To use this feature for remote Layer 3 portal authentication, the portal server must be an IMC portal server
that supports the page auto-redirection function.
Examples
# Configure the device to redirect a portal user to http://www.testpt.cn after the user passes portal
authentication.
<Sysname> system-view
[Sysname] portal redirect-url http://www.testpt.cn

portal server

Use portal server to configure a portal server for Layer 3 portal authentication.
Use undo portal server to remove a portal server, restore the default destination port and default URL
address, or delete the shared key or the VPN instance configuration.
182