Ike Sa Keepalive-Timer Timeout; Ike Sa Nat-Keepalive-Timer Interval - HP HSR6600 Command Reference Manual

ike sa keepalive-timer timeout

Use ike sa keepalive-timer timeout to set the ISAKMP SA keepalive timeout.
Use undo ike sa keepalive-timer timeout to disable the function.
Syntax
ike sa keepalive-timer timeout seconds
undo ike sa keepalive-timer timeout
Default
No keepalive packet is sent.
Views
System view
Default command level
2: System level
Parameters
seconds: ISAKMP SA keepalive timeout in seconds, in the range 20 to 28,800.
Usage guidelines
The keepalive timeout configured at the local end must be longer than the keepalive interval configured
at the remote end. Since it seldom occurs that more than three consecutive packets are lost on a network,
the keepalive timeout can be configured to be three times of the keepalive interval.
Examples
# Set the keepalive timeout to 20 seconds.
<Sysname> system-view
[Sysname] ike sa keepalive-timer timeout 20
Related commands
ike sa keepalive-timer interval

ike sa nat-keepalive-timer interval

Use ike sa nat-keepalive-timer interval to set the NAT keepalive interval.
Use undo ike sa nat-keepalive-timer interval to disable the function.
Syntax
ike sa nat-keepalive-timer interval seconds
undo ike sa nat-keepalive-timer interval
Default
The NAT keepalive interval is 20 seconds.
Views
System view
342