HP HSR6600 Command Reference Manual page 41

Default command level
1: Monitor level
Parameters
access-type: Specifies the user connections of the specified access type.
• dot1x: Indicates 802.1X authentication. This keyword is supported only on the SAP interface
modules that are operating in Layer 2 mode.
mac-authentication: Indicates MAC address authentication. This keyword is supported only on the
•
SAP interface modules that are operating in Layer 2 mode.
portal: Indicates portal authentication.
•
domain isp-name: Specifies the user connections of an ISP domain. The isp-name argument represents
the name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.
interface interface-type interface-number: Specifies the user connections on an interface. Only Layer 2
Ethernet interfaces are supported.
ip ip-address: Specifies the user connections of an IP address.
mac mac-address: Specifies the user connections of a MAC address, with mac-address in the format
H-H-H.
ucibindex ucib-index: Specifies the user connection that uses the connection index, in the range of 0 to
4294967295.
user-name user-name: Specifies the user connections that use the username. The user-name argument is
a case-sensitive string of 1 to 80 characters. For a username entered without a domain name, the system
assumes that the user is in the default domain name or the mandatory authentication domain.
slot slot-number: Specifies the user connections on the card in the slot represented by the slot-number
argument.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The following matrix shows the option and router compatibility:
Option
slot slot-number
This command does not display information about FTP user connections.
With no parameter specified, this command displays brief information about all AAA user connections.
If you specify the ucibindex ucib-index option, this command displays detailed information. Otherwise,
this command displays brief information.
If an interface is configured with a mandatory authentication domain (for example, an 802.1X
mandatory authentication domain), the device uses the mandatory authentication domain to perform
6602 HSR6602
No Yes
28
6604/6608/6616
Yes