Authentication Login - HP HSR6600 Command Reference Manual

[Sysname-isp-test] authentication lan-access radius-scheme rd local
Related commands
• local-user
authentication default
•
• radius scheme

authentication login

Use authentication login to configure the authentication method for login users through the console, AUX,
or Asyn port, Telnet, or FTP.
Use undo authentication login to restore the default.
Syntax
authentication login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none | radius-scheme
radius-scheme-name [ local ] }
undo authentication login
Default
The default authentication method for the ISP domain is used for login users.
Views
ISP domain view
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The specified RADIUS or HWTACACS scheme must have been configured.
Examples
# Configure ISP domain test to use local authentication for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login local
# Configure ISP domain test to use RADIUS authentication scheme rd for login users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login radius-scheme rd local
13