Encryption-Algorithm - HP HSR6600 Command Reference Manual

Default
No DPD detector is applied to an IKE peer.
Views
IKE peer view
Default command level
2: System level
Parameters
dpd-name: DPD detector name, a string of 1 to 32 characters.
Examples
# Apply dpd1 to IKE peer peer1.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] dpd dpd1

encryption-algorithm

Use encryption-algorithm to specify an encryption algorithm for an IKE proposal.
Use undo encryption-algorithm to restore the default.
Syntax
encryption-algorithm { 3des-cbc | aes-cbc [ key-length ] | des-cbc }
undo encryption-algorithm
Default
In FIPS mode, an IKE proposal uses the 128-bit AES-CBC encryption algorithm in CBC mode.
In non-FIPS mode, an IKE proposal uses the 56-bit DES encryption algorithm in CBC mode.
Views
IKE proposal view
Default command level
2: System level
Parameters
3des-cbc: Uses the 3DES algorithm in CBC mode as the encryption algorithm. The 3DES algorithm uses
168-bit keys for encryption. This keyword is not supported in FIPS mode.
aes-cbc: Uses the AES algorithm in CBC mode as the encryption algorithm. The AES algorithm uses
128-bit, 192-bit, or 256-bit keys for encryption.
key-length: Key length for the AES algorithm, which can be 128, 192 or 256 bits and is defaulted to 128
bits.
des-cbc: Uses the DES algorithm in CBC mode as the encryption algorithm. The DES algorithm uses
56-bit keys for encryption. This keyword is not supported in FIPS mode.
Examples
# Use 56-bit DES in CBC mode as the encryption algorithm for IKE proposal 10.
335