Stop-Accounting-Buffer Enable (Hwtacacs Scheme View); Timer Quiet (Hwtacacs Scheme View) - HP HSR6600 Command Reference Manual

Related commands
display hwtacacs
•
vpn-instance (HWTACACS scheme view)
•

stop-accounting-buffer enable (HWTACACS scheme view)

Use stop-accounting-buffer enable to enable the device to buffer stop-accounting requests to which no
responses are received.
Use undo stop-accounting-buffer enable to disable the buffering function.
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
Default
The device buffers stop-accounting requests to which no responses are received.
Views
HWTACACS scheme view
Default command level
2: System level
Usage guidelines
Stop-accounting requests affect the charge to users. A NAS must make its best effort to send every
stop-accounting request to the HWTACACS accounting servers. For each stop-accounting request that
receives no response in the specified period of time, the NAS buffers and resends the packet until it
receives a response or until the number of transmission attempts reaches the configured limit. In the latter
case, the NAS discards the packet.
Examples
# In HWTACACS scheme hwt1, enable the device to buffer the stop-accounting requests that receive no
responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
Related commands
• reset stop-accounting-buffer
display stop-accounting-buffer
•

timer quiet (HWTACACS scheme view)

Use timer quiet to set the quiet timer for the primary server.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
115