HP HSR6600 Command Reference Manual page 288

<Sysname> display ipsec policy brief
IPsec Policy Name
------------------------------------------------------------------------
bbbbbbbbbbbbbbb-1
man-1
map-1
nat-1
test-1
toccccc-1
IPsec Policy Name
------------------------------------------------------------------------
man-1
Table 35 Command output
Field
IPsec Policy Name
Mode
ACL
Mapped Template
Local Address
Remote Address
# Display detailed information about all IPsec policies.
<Sysname> display ipsec policy
===========================================
IPsec Policy Group: "policy_isakmp"
Interface: GigabitEthernet3/0/1
===========================================
------------------------------------
IPsec policy name: "policy_isakmp"
sequence number: 10
acl version: ACL4
mode: isakmp
-------------------------------------
encapsulation mode: tunnel
security data flow : 3000
selector mode: standard
ike-peer name:
PFS: N
transform-set name: prop1
Mode ACL IKE Peer Name
template
manual 3400
isakmp 3000 peer
isakmp 3500 nat
isakmp 3200 test
isakmp 3003 tocccc
Mode ACL Local Address
manual 3400 3.3.3.1
Description
Name and sequence number of the IPsec policy separated by hyphen.
Negotiation mode of the IPsec policy:
•
manual—Manual mode.
•
isakmp—IKE negotiation mode.
•
template—IPsec policy template mode.
•
gdoi—GDOI mode.
ACL referenced by the IPsec policy.
Referenced IPsec policy template.
IP address of the local end.
IP address of the remote end.
per
275
Mapped Template
aaaaaaaaaaaaaaa
Remote Address
3.3.3.2