Portal Delete-User; Portal Domain - HP HSR6600 Command Reference Manual

Command
portal backup-group
Examples
# In the stateful failover networking environment, add the portal service backup interface GigabitEthernet
0/0/1 to portal group 1 on the source backup device.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/0/1
[Sysname-GigabitEthernet0/0/1] portal backup-group 1
On the peer device (destination backup device), you must also add the corresponding service backup
interface in to portal group 1.

portal delete-user

Use portal delete-user to log off portal users.
Syntax
portal delete-user { ip-address | all | interface interface-type interface-number }
Views
System view
Default command level
2: System level
Parameters
ip-address: Logs off the portal user with the specified IPv4 address.
all: Logs off all portal users.
interface interface-type interface-number: Logs off all IPv4 portal users on the specified interface.
Examples
# Log out the portal user whose IP address is 1.1.1.1.
<Sysname> system-view
[Sysname] portal delete-user 1.1.1.1
Related commands
display portal user

portal domain

Use portal domain to specify an authentication domain for portal users on an interface. Then, the device
uses the authentication domain for authentication, authorization and accounting (AAA) of the portal
users on the interface.
Use undo portal domain to delete the authentication domain specified for portal users.
Syntax
portal domain domain-name
6602 HSR6602
Yes Yes
175
6604/6608/6616
No