Authorization Default - HP HSR6600 Command Reference Manual

Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform any authorization exchange. In this case, an authenticated user can access only
commands of Level 0.
Usage guidelines
The specified HWTACACS scheme must have been configured.
With command line authorization configured, a user who has logged in to the device can execute only
the commands with a level lower than or equal to that of the local user.
Examples
# Configure ISP domain test to use local command line authorization.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization command local
# Configure ISP domain test to use HWTACACS scheme hwtac for command line authorization and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization command hwtacacs-scheme hwtac local
Related commands
• local-user

authorization default

•
hwtacacs scheme
•
authorization default
Use authorization default to configure the default authorization method for an ISP domain.
Use undo authorization default to restore the default.
Syntax
authorization default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo authorization default
Default
The default authorization method for the ISP domain of an ISP domain is local.
Views
ISP domain view
Default command level
2: System level
18