Handshake Timeout - HP HSR6600 Command Reference Manual

Examples
# Display information about SSL server policy policy1.
<Sysname> display ssl server-policy policy1
SSL Server Policy: policy1
PKI Domain: domain1
Ciphersuite:
RSA_RC4_128_MD5
RSA_RC4_128_SHA
RSA_DES_CBC_SHA
RSA_3DES_EDE_CBC_SHA
RSA_AES_128_CBC_SHA
RSA_AES_256_CBC_SHA

Handshake Timeout: 3600

Close-mode: wait disabled
Session Timeout: 3600
Session Cachesize: 500
Client-verify: disabled
Client-verify weaken: disabled
Table 56 Command output
Field
SSL Server Policy
PKI Domain
Ciphersuite
Handshake Timeout
Close-mode
Session Timeout
Session Cachesize
Client-verify
handshake timeout
Use handshake timeout to set the handshake timeout time for an SSL server policy.
Use undo handshake timeout to restore the default.
Description
SSL server policy name.
PKI domain used by the SSL server policy.
If no PKI domain is specified for the SSL server policy, nothing is displayed for this
field, and the SSL server generates and signs a certificate for itself and does not
obtain a certificate from a CA server.
Cipher suites supported by the SSL server policy.
Handshake timeout time of the SSL server policy, in seconds.
Close mode of the SSL server policy:
•
wait disabled—In this mode, the server sends a close-notify alert message to
the client and then closes the connection immediately without waiting for the
close-notify alert message of the client.
•
wait enabled—In this mode, the server sends a close-notify alert message to
the client and then waits for the close-notify alert message of the client. Only
after receiving the expected message, does the server close the connection.
Session timeout time of the SSL server policy, in seconds.
Maximum number of buffered sessions of the SSL server policy.
Whether the SSL server policy requires the client to be authenticated.
393