Retry Realtime-Accounting - HP HSR6600 Command Reference Manual

Syntax
retry retry-times
undo retry
Default
The maximum number of RADIUS packet transmission attempts is 3.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
retry-times: Maximum number of RADIUS packet transmission attempts, ranging from 1 to 20.
Usage guidelines
Because RADIUS uses UDP packets to transmit data, the communication is not reliable. If the device does
not receive a response to its request from the RADIUS server within the response timeout period, it
retransmits the RADIUS request. If the number of transmission attempts exceeds the limit but the device
still receives no response from the RADIUS server, the device considers the request a failure.
The maximum number of packet transmission attempts multiplied by the RADIUS server response timeout
period cannot be greater than 75.
Examples
# Set the maximum number of RADIUS request transmission attempts to 5 for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] retry 5
Related commands
radius scheme
•
timer response-timeout
•

retry realtime-accounting

Use retry realtime-accounting to set the maximum number of accounting attempts.
Use undo retry realtime-accounting to restore the default.
Syntax
retry realtime-accounting retry-times
undo retry realtime-accounting
Default
The maximum number of accounting attempts is 5.
Views
RADIUS scheme view
83