Pki Configuration Commands; Attribute - HP HSR6600 Command Reference Manual

PKI configuration commands

The router supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.

attribute

Use attribute to configure the attribute rules of the certificate issuer name, certificate subject name and
alternative certificate subject name.
Use undo attribute to delete the attribute rules of one or all certificates.
Syntax
attribute id { alt-subject-name { fqdn | ip } | { issuer-name | subject-name } { dn | fqdn | ip } } { ctn |
equ | nctn | nequ} attribute-value
undo attribute { id | all }
Default
No restriction exists on the issuer name, subject name, and alternative subject name of a certificate.
Views
Certificate attribute group view
Default command level
2: System level
Parameters
id: Specifies the sequence number of the certificate attribute rule, in the range of 1 to 16.
alt-subject-name: Specifies the name of the alternative certificate subject.
fqdn: Specifies the FQDN of the entity.
ip: Specifies the IP address of the entity.
issuer-name: Specifies the name of the certificate issuer.
subject-name: Specifies the name of the certificate subject.
dn: Specifies the distinguished name of the entity.
ctn: Specifies the contain operation.
equ: Specifies the equal operation.
nctn: Specifies the not-contain operation.
nequ: Specifies the not-equal operation.
attribute-value: Value of the certificate attribute, a case-insensitive string of 1 to 128 characters.
all: Specifies all certificate attributes.
246