Session Log Time-Active; Session Max-Entries - HP HSR6600 Command Reference Manual

Examples
# Set the packet count threshold for session logging to 10 mega-packets.
<Sysname> system-view
[Sysname] session log packets-active 10

session log time-active

Use session log time-active to set the holdtime threshold for session logging.
Use undo session log time-active to remove the setting.
Syntax
session log time-active time-value
undo session log time-active
Default
The system does not output session logs based on holdtime threshold.
Views
System view
Default command level
2: System level
Parameters
time-value: Holdtime threshold, in minutes. It is a multiple of 10 in the range of 10 to 120.
Examples
# Set the holdtime threshold for session logging to 50 minutes.
<Sysname> system
[Sysname] session log time-active 50

session max-entries

Use session max-entries to set the maximum number of sessions.
Use undo session max-entries to cancel the upper limit.
Syntax
session max-entries max-entries slot slot-number
undo session max-entries [ max-entries ] slot slot-number
Default
The maximum number of sessions depends on the device model.
Views
System view
Default command level
2: System level
434