Ssh Client Authentication Server - HP HSR6600 Command Reference Manual

Hide thumbs Also See for HSR6600:
Table of Contents

Advertisement

The preferred client-to-server HMAC algorithm is sha1-96.
The preferred key exchange algorithm is dh-group14.
The preferred server-to-client encryption algorithm is aes128.
The preferred server-to-client HMAC algorithm is sha1-96.
Examples
# Connect to server 2:5::8:9, using the following connection scheme:
The preferred key exchange algorithm: dh-group1.
The preferred server-to-client encryption algorithm: aes128.
The preferred client-to-server HMAC algorithm: md5.
The preferred server-to-client HMAC algorithm: sha1-96.
<Sysname> sftp ipv6 2:5::8:9 prefer-kex dh-group1 prefer-stoc-cipher aes128
prefer-ctos-hmac md5 prefer-stoc-hmac sha1-96
Input Username:

ssh client authentication server

Use ssh client authentication server on the client to configure the host public key of a specified server so
that the client can determine whether the server is trustworthy.
Use undo ssh client authentication server to remove the configuration.
Syntax
ssh client authentication server server assign publickey keyname
undo ssh client authentication server server assign publickey
Default
No host public key of a server is configured. When the client logs into a server, it uses the IP address or
host name of the server as the public key name.
Views
System view
Default command level
2: System level
Parameters
server: IP address or name of the server, a string of 1 to 80 characters.
assign publickey keyname: Specifies the name of the host public key of the server, a string of 1 to 64
characters.
Usage guidelines
If the client does not support first-time authentication, it will reject unauthenticated servers. In this case,
you need to configure the public keys of the servers and specify the mappings between public keys and
servers on the client, so that the client uses the correct public key of a server to authenticate the server.
The specified host public key of the server must already exist.
Examples
# Configure the public key of the server at 192.168.0.1 to be key1.
380

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 6600

Table of Contents