Ssh Client First-Time Enable; Ssh Client Ipv6 Source - HP HSR6600 Command Reference Manual

<Sysname> system-view
[Sysname] ssh client authentication server 192.168.0.1 assign publickey key1
Related commands

ssh client first-time enable

ssh client first-time enable
Use ssh client first-time enable to enable the first-time authentication function.
Use undo ssh client first-time to disable the function.
Syntax
ssh client first-time enable
undo ssh client first-time
Default
The function is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
Without first-time authentication, a client not configured with the server's host public key does not access
the server. To access the server, a user must configure in advance the server's host public key locally and
specify the public key name for authentication.
With first-time authentication, when an SSH client not configured with the server's host public key
accesses the server for the first time, the user can continue accessing the server, and save the server's host
public key on the client. When accessing the server again, the client uses the saved server host public key
to authenticate the server.
Because the server might update its key pairs periodically, a client must obtain the most recent host public
key of the server for successful authentication of the server.
Examples
# Enable the first-time authentication function.
<Sysname> system-view
[Sysname] ssh client first-time enable

ssh client ipv6 source

Use ssh client ipv6 source to specify the source IPv6 address or source interface for the Stelnet client.
Use undo ssh client ipv6 source to remove the configuration.
Syntax
ssh client ipv6 source { interface interface-type interface-number | ipv6 ipv6-address }
undo ssh client ipv6 source
381