HP HSR6600 Command Reference Manual page 78

Field
RADIUS received messages statistic
Normal auth request
Auth request
Account request
Account off request
PKT auth timeout
PKT acct_timeout
Realtime Account timer
PKT response
Session ctrl pkt
Normal author request
Set policy result
Accounting on request
Accounting on response
Dynamic Author Ext request
RADIUS sent messages statistic
Auth accept
Auth reject
Auth continue
Account success
Account failure
Server ctrl req
RecError_MSG_sum
SndMSG_Fail_sum
Timer_Err
Alloc_Mem_Err
State Mismatch
Other_Error
No-response-acct-stop packet
Discarded No-response-acct-stop
packet for buffer overflow
# On the HSR6602/6604/6608/6616 router, display statistics about RADIUS packets on the card in
slot 0.
<Sysname> display radius statistics slot 0
Slot 0:state statistic(total=8000):
DEAD = 8000
Description
Statistics for received RADIUS messages.
Counts of normal authentication requests.
Counts of normal authentication requests.
Counts of accounting requests.
Counts of stop-accounting requests.
Counts of authentication timeout messages.
Counts of accounting timeout messages.
Counts of real-time accounting requests.
Counts of responses from servers.
Counts of session control messages.
Counts of normal authorization requests.
Counts of responses to the Set policy packets.
Counts of accounting-on requests.
Counts of accounting-on responses.
Counts of dynamic authorization extension requests.
Statistics for sent RADIUS messages.
Number of accepted authentication packets.
Number of rejected authentication packets.
Number of authentication-continue packets received.
Number of accounting succeeded packets.
Number of accounting failed packets.
Number of server control requests.
Number of received packets in error.
Number of packets that failed to be sent out.
Number of packets for indicating timer startup failures.
Number of packets for indicating memory allocation failures.
Number of packets for indicating mismatching status.
Number of packets for indicating other types of errors.
Number of times that no response was received for stop-accounting
packets.
Number of stop-accounting packets that were buffered but then
discarded due to full memory.
AuthProc = 0
65
AuthSucc = 0